LB1233M 71598rm(ki) no. 5954-1/5 ordering number : en5954 LB1233M high-voltage/large-current darlington transistor array monolithic digital ic overview the LB1233M is a darlington transistor array using npn transistors. it is suitable for applications such as hammer drive, lamp control, relay drive, etc. it also incorporates a spark killer diode for the l load. features ? designed for high voltage (v ceo 3 50v), large current drive capability (ic max=500 ma) ? integrated base current limiting resistor ? direct drive capability with ttl, cmos output package dimensions unit:mm 3035a-mfp16 1 16 8 9 10.1 0.15 0.605 1.27 0.35 0.1 1.8max 1.5 0.625 4.4 5.15 6.4 sanyo electric co., ltd. semiconductor bussiness headquarters tokyo office tokyo bldg., 1-10, 1 chome, ueno, taito-ku, tokyo, 110-8534 japan [LB1233M] sanyo:mfp16 any and all sanyo products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability | such as life-support systems | aircraft ? s control systems | or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. consult with your sanyo representative nearest you before using any sanyo products described or contained herein in such applications. sanyo assumes no responsibility for equipment failures that result from using products at values that exceed | even momentarily | rated values (such as maximum ratings | operating condition ranges | or other parameters) listed in products specifications of any and all sanyo products described or contained herein.
LB1233M 71598rm(ki) no. 5954-2/5 ordering number : en5954 specifications absolute maximum ratings at ta = 25 c ratings unit symbol parameter applied output voltage output current applied input voltage ground pin current allowable power dissipation operating temperature storage temperature 50 500 30 2.8 0.39 ?0 to +75 ?0 to +150 v ma v a w c c v out i out v in i gnd tstg per unit all 7 channels on, f = 10 hz, duty = 5% pd max topr conditions allowable operating ranges at ta = 25 c symbol conditions ratings unit parameter applied output voltage input high level voltage input low level voltage v out v ih v il i out = 350 ma i out 100 a 50 3 to 30 -0.3 to +0.3 v v v electrical characteristics at ta = 25 c unit min typ max ratings symbol parameter v out = 50v i in = 0.25 ma, i out = 100 ma i in = 0.35 ma, i out = 200 ma i in = 0.5 ma, i out = 350 ma v in = 1 ma, i out = 400 ma v in = 3.85v v r (s) = 50v i f (s) = 350 ma i f (s) = 400 ma conditions output leakage current output voltage input current spark killer diode leakage current spark killer diode forward current i off v oh 1 v oh 2 v oh 3 v oh 4 i in i r (s) v f (s)1 v f (s)2 0.9 1.1 1.3 0.93 100 1.1 1.3 1.6 2.4 1.35 100 2.0 2.4 a v v v v ma a v v
LB1233M 71598rm(ki) no. 5954-3/5 ordering number : en5954 pdmax ?ta 0.23 0 0.1 -20 0 20 40 60 80 100 0.2 0.3 0.5 0.4 0.39 allowable power dissipation, pdmax C w ambient temperature, ta C ?c equivalent circuit 0 6 5 0 6 5 0 6 5 0 6 5 0 6 5 0 6 5 0 6 5 7 $ $ ( / % l
|